Interference free transfer by means of screening

• Shielded too prefent that the loudspeaker cable acts as antenna for mains-born interference
• Beryllium copper spring connectors, 24 carat gold plated, to obtain to lowest possible resistance
• 2 X 1.5 mm²/AWG 15
• Unique insulation with very low dielectric losses, even lower than Teflon®
• Burned in for the larger part (± 90%)
  

Not only non-feedback amplifiers (mostly tube amplifiers) do have advantage of our shielded speakercables because they work mostly with lower power and therefore higher efficiency speakers because of this, interference has even more influence on the musical performace of the power amplifier.
 

The SPEAKER CABLE is made of very pure OFC (copper) and multi-strand veins with a vein average of 3 mm². If required we can provide this cable also as biwiring cable (1.5 mm²). The black braided sleeving is used to dissipate static buildup.

The SPEAKER CABLE is standard carried out with gold plated beryllium copper spring connector plugs. If required, it is available with every possible connector, such as torches (6 and 9 mm ) or with Neutrik/Speakon connectors. The installation of the SPEAKER CABLE is simple. The only thing that you must do extra is screw down the earthing wire (at the beginning of the SPEAKER CABLE) under a screw of the metal housing of your amplifier. Your amplifier has to be grounded of course!

We have already burned in (90 %) the SPEAKER CABLE (with the us of the Cable Cooker) so you can hear the quality of this cable immediately.